• Out-of-Stock

Holding magnet with facilitated separation 160x100x30 / N

Holding magnet with facilitated separation 160x100x30 / NHolding magnet with facilitated separation 160x100x30 / N€308.10

Your Query is sent.

  •     *Required Fields

Loading

Of Price Net Price Gross
1 pcs. €308.10 €378.96
Product unavailable

Ask a question
Performance parameters

Manufacturer

Enes Magnesy

Length

160 [mm]

Width

100 [mm]

Height

30 [mm]

handle length

235 [mm]

Thread type

wewnętrzny, M8

Magnet type

Neodymium

Maximal hoisting capacity

800 [kg]

recommended maximum thickness of the metal sheet

Coating

Zinc (Zn)

Maximum working temperature

≤ 80 [°C]

with easier detachment

yes

handling mode

ręczny

With handle

yes

Weight

4.66 [kg]

The maximum pull force: ~800 [kg]
The maximum slide force: ~200 [kg]

Two threaded holes M8.
Length of handle: ~235 [mm].
Total width with handle: ~140 [mm].

Holding magnet with facilitated separation is used for secure of molds on vibro-tables during production of concrete elements.

In the holding magnet sintered neodymium magnets (NdFeB) were used. The maximum working temperature for holding magnets involving neodymium magnets is 80o[C].

The pull force given refers to hoisting capacity measured in optimal conditions, by using as a backing plate a sheet made of low-carbon steel, 10 [mm] thick, of smooth surface and with the force acting perpendicularly, in room temperature.

Notice: the pull force given should be treated as only a comparative value. An actual pull force depends on the following factors:

  • air gap (a distance) between holding magnet and an attracted element
  • material, of which an attracted element is made (the higher carbon proportion in steel, the smaller pull force)
  • surface of an attracted element (the smoother the surface, bigger the pull force)
  • direction of acting of detaching force (the biggest pull force is obtained with perpendicular acting of detaching force)
  • thickness of an attracted element (the element cannot be too thin, because in such case part of magnetic flux is not used for closing of a magnetic circuit)
  • working temperature.

We generally recommend individual checking of the holding magnet in any specific working conditions.

Weight of the holding magnet: ~4,7 [kg]

The maximum pull force: ~800 [kg]
The maximum slide force: ~200 [kg]

Two threaded holes M8.
Length of handle: ~235 [mm].
Total width with handle: ~140 [mm].

Holding magnet with facilitated separation is used for secure of molds on vibro-tables during production of concrete elements.

In the holding magnet sintered neodymium magnets (NdFeB) were used. The maximum working temperature for holding magnets involving neodymium magnets is 80o[C].

The pull force given refers to hoisting capacity measured in optimal conditions, by using as a backing plate a sheet made of low-carbon steel, 10 [mm] thick, of smooth surface and with the force acting perpendicularly, in room temperature.

Notice: the pull force given should be treated as only a comparative value. An actual pull force depends on the following factors:

  • air gap (a distance) between holding magnet and an attracted element
  • material, of which an attracted element is made (the higher carbon proportion in steel, the smaller pull force)
  • surface of an attracted element (the smoother the surface, bigger the pull force)
  • direction of acting of detaching force (the biggest pull force is obtained with perpendicular acting of detaching force)
  • thickness of an attracted element (the element cannot be too thin, because in such case part of magnetic flux is not used for closing of a magnetic circuit)
  • working temperature.

We generally recommend individual checking of the holding magnet in any specific working conditions.

Weight of the holding magnet: ~4,7 [kg]

umzuo160x100x30n
Specific References